ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN RS 230 FLASH is a high-performance, rapidsetting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN RS 230 FLASH resin is combined with ALSAN RS FLEECE to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FLASH is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10 – 15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of this PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRABARRIER 20/30/40 PE
SOPRABARRIER is composed of a virgin blended linear-low-density polyethylene (LLDPE). SOPRABARRIER is designed to protect underlying roofing and waterproofing assemblies…
View Product
SOPRAFIX® BASE 613
SOPRAFIX BASE 613 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 613…
View Product
SOPRANATURE® PAVER PEDESTALS
SOPRANATURE PAVER PEDESTALS support paving blocks on pedestrian traffic terraces. Manufactured from injection molded polypropylene, SOPRANATURE PAVER PEDESTALS consist of…
View ProductRelated Projects
Hard Rock Hotel – Universal Studios, Florida
The Hard Rock Hotel at Universal Studios, Florida features a SOPREMA roof system including SOPRALENE base and cap plies.
Fashion Institute of Technology – New York City, New York
The Fashion Institute of Technology needed a new roof on Building E in the dead of winter. In addition they wanted a low odor, green solution. The answer, SOPREMA’s advanced ALSAN RS 260 LO PMA liquid membrane system.