ALSAN® RS 260 LO FIELD SKU: L-RS050S
ALSAN® RS 260 LO FIELD SKU: L-RS050S
ALSAN RS 260 LO FIELD is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO FIELD resin is combined with fleece fabric to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 260 LO FIELD is available in a summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 260 LO FIELD to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® COATING BUTYL FLEECE TAPE
ALSAN COATING BUTYL FLEECE TAPE contains a butyl rubber compound with a polyester fleece face used where required or recommended…
View ProductCOLPLY® ADHESIVE
COLPLY ADHESIVE is a high quality, single component, asphalt cutback adhesive formulated specifically for adhering SBS-modified bitumen membrane systems. COLPLY…
View ProductCOLPHENE® LM BARR
COLPHENE® LM BARR is a single component with 98% solids content and a liquid-applied, moisture-curing elastomeric waterproofing membrane.
View ProductRelated Projects
ANB Bank – Denver, Colorado
When the Denver ANB Bank was to go through a remodel, SOPREMA’s COLPHENE® LM BARR product was selected to waterproof the building. With a tight deadline and existing concrete preparation to take into consideration, COLPHENE LM BARR was the perfect solution due to its excellent performance qualities. With COLPHENE LM BARR’s STPE moisture cure technology, the new and improved ANB Bank will have a continuous waterproofing layer that can withstand extreme cold and high temperatures without cracking or softening for many years to come.
San Francisco War Memorial – San Francisco, California
SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.