ALSAN® RS 260 LO FLASH SKU: L-RS0525
ALSAN® RS 260 LO FLASH SKU: L-RS0525
ALSAN RS 260 LO FLASH is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications. ALSAN RS 260 LO FLASH resin is combined with fleece fabric to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 260 LO FLASH is available in a summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 260 LO FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® RS TEXTURED COATING
ALSAN RS Textured Coating is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) liquid resin with integrally mixed aggregate. ALSAN RS…
View ProductSOPRALENE® 250 FR GR HC
SOPRALENE 250 FR GR HC (fire retardant, granulated, hybrid cap) is an SBS modified bitumen cap ply for use in…
View ProductCOLPLY® EF ADHESIVE
COLPLY EF ADHESIVE (environmentally friendly) is a moisture cure, single-component membrane adhesive using a highly advanced Silyl-Terminated Polyether (STPE) polymer….
View ProductRelated Projects
Fashion Institute of Technology – New York City, New York
The Fashion Institute of Technology needed a new roof on Building E in the dead of winter. In addition they wanted a low odor, green solution. The answer, SOPREMA’s advanced ALSAN RS 260 LO PMA liquid membrane system.
Columbia University Medical Center – New York, New York
When adding a new building to the Columbia University Medical Center campus, a top priority was that all products were available for a single source manufacturer that offered one warranty for the entire project. That is where SOPREMA came in.