ELASTOPHENE® FLAM FR GR SKU: 03864
ELASTOPHENE® FLAM FR GR SKU: 03864
ELASTOPHENE® Flam FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam FR GR is composed of a proprietary formulation of elastomeric styrene butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Component Cap
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 130 mils (3.3 mm)
- Thickness (nominal) 138 mils (3.5 mm)
- Topside Granules
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE Flam FR GR onto the roof surface and allow to relax. Position ELASTOPHENE Flam FR GR in desired position and back roll the product. ELASTOPHENE Flam FR GR is then heat welded to approved substrates. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® TRAFIK RS 733 PART B
ALSAN TRAFIK RS 733 Part B (filler) is utilized in conjunction with ALSAN TRAFIK RS 733 Part A Summer or…
View Product
SOPRANATURE® MRM 5
SOPRANATURE MRM 5 is a moisture retention mat made from recycled polyester, designed to provide water and nutrient storage for…
View Product
SENTINEL® MOLDED UNIVERSAL CORNERS
SENTINEL MOLDED UNIVERSAL CORNERS are injection molded, unreinforced flashings that are used to flash a variety of irregular details or…
View ProductRelated Projects
Berry Architecture Office Building – Red Deer, Alberta
“The building’s crowning glory is the green roof which features a stream, native plantings, vegetable gardens, and bird, butterfly and bee habitats”, as stated by Berry Architecture + Associates. SOPREMA®’s SOPRANATURE® vegetated system was chosen for this project attaining LEED Gold certification.
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.