SOPREMA

Search

ELASTOPHENE® FLAM HR 3.0 SKU: 00252

ELASTOPHENE® FLAM HR 3.0 SKU: 00252

ELASTOPHENE® Flam HR 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam HR 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6163
  • Installation Method Heat Welded
  • Reinforcement Glass Scrim
  • Thickness (minimum) 110 mils (2.8 mm)
  • Thickness (nominal) 118 mils (3.0 mm)
  • Topside Burn Off Film
  • Underside Burn Off Film

Installation

Prior to installation, unroll ELASTOPHENE Flam HR 3.0 onto the roof surface and allow to relax. Position ELASTOPHENE Flam HR 3.0 in desired position and back roll the product. ELASTOPHENE Flam HR 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam HR 3.0 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

ALSAN® RS 260 LO FIELD

ALSAN RS 260 LO FIELD is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO FIELD…

View Product

COLPLY® FLASHING CEMENT

COLPLY Flashing Cement is high quality, single component viscous cement formulated specifically for adhering SBS-modified bitumen membrane flashing assemblies. COLPLY…

View Product

SOPRAFIX® MBBR BATTEN BAR

SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with…

View Product

Related Projects

Cleveland Clinic – Cleveland, Ohio

Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.

Indiana War Memorial – Indianapolis, Indiana

The Indiana War Memorial has had leak issues since its construction in 1924. The leak issues were addressed by using SOPREMA’s ALSAN® TRAFIK HP and SOPRALENE® Flam 180 & 250 membranes. The Memorial is no longer leaking.