ELASTOPHENE® FLAM HS FR GR SKU: 01284, 01285
ELASTOPHENE® FLAM HS FR GR SKU: 01284, 01285
ELASTOPHENE® Flam HS FR GR (high strength, fire retardant, granules) is an SBS modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam HS FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement. The topside is surfaced with ceramic coated granules and the underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6162
- Component Cap
- Installation Method Heat Welded
- Reinforcement Composite
- Thickness (minimum) 142 mils (3.6 mm)
- Thickness (nominal) 150 mils (3.8 mm)
- Topside Granules
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE Flam HS FR GR onto the roof surface and allow to relax. Position ELASTOPHENE Flam HS FR GR in desired position and back roll the product. ELASTOPHENE Flam HS FR GR is then heat welded to approved substrates. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® COATING SIL 402 FLASHING
ALSAN COATING SIL 402 FLASHING is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare…
View Product
COLPHENE® SP 3.0
COLPHENE® SP 3.0 (sanded, polyolefin) is a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen, reinforced with a high-quality random glass fiber mat.
View Product
SOPRALENE® 180 SANDED 2.2
SOPRALENE 180 Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE…
View ProductRelated Projects
Flores De La Playa Condominium – Satellite Beach, Florida
When selecting a product to re-roof the building after the storm, it was important to select a product that would be able to withstand the impact of future tropical storms and hurricanes. The system that was selected included a base ply of ELASTOPHENE® SP 3.0 with 350 PSI lightweight concrete applied on top and SOPRALENE® 180 PS 3.0 with a cap sheet of SOPRALENE Flam 180 FR GR.
Indiana War Memorial – Indianapolis, Indiana
The Indiana War Memorial has had leak issues since its construction in 1924. The leak issues were addressed by using SOPREMA’s ALSAN® TRAFIK HP and SOPRALENE® Flam 180 & 250 membranes. The Memorial is no longer leaking.