SOPREMA

Search

ELASTOPHENE® FLAM STICK SKU: 00570

ELASTOPHENE® FLAM STICK SKU: 00570

ELASTOPHENE® Flam Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Self Adhered
  • Reinforcement Glass Fiber
  • Thickness (minimum) 79 mils (2.0 mm)
  • Thickness (nominal) 87 mils (2.2 mm)
  • Topside Burn Off Film
  • Underside Self Adhered

Installation

Prior to installation, unroll ELASTOPHENE Flam Stick onto the roof surface and allow to relax. Place ELASTOPHENE Flam Stick in desired position. Remove the protective release film from the underside of the sheet and roll ELASTOPHENE Flam Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam Stick via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

ELASTOPHENE® LS FR GR

ELASTOPHENE LS FR GR (low slope, fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply…

View Product

SOPRANATURE® SEDUM TILES

SOPRANATURE SEDUM TILES have a coconut fiber base to assure effective rooting of plants to the underlying growth medium and…

View Product

SOPRAFIX® BASE 622

SOPRAFIX BASE 622 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 622…

View Product

Related Projects

Airport High School – West Columbia, South Carolina

Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.

University of Oregon Residence Hall – Eugene, Oregon

With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.