ELASTOPHENE® FR GR SKU: 01159
ELASTOPHENE® FR GR SKU: 01159
ELASTOPHENE FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6163
- Component Cap
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 130 mils (3.3 mm)
- Thickness (nominal) 138 mils (3.5 mm)
- Topside Granules
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE FR GRonto the roof surface and allow to relax. Place ELASTOPHENE FR GR in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. ELASTOPHENE FR GR is then rolled into the cold adhesive and subsequently broomed in. Refer to the SOPREMA SBS Roofing Installation Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRA™ 4897
SOPRA 4897 is an SBS-modified bitumen venting base sheet for use in approved multiply membrane and flashing assemblies. SOPRA 4897…
View Product
COLPLY® EF FLASHING CEMENT
COLPLY EF FLASHING CEMENT is a moisture cure singlecomponent elastomeric liquid-applied flashing adhesive using a highly advanced Silyl-Terminated Polyether (STPE)…
View Product
ELASTOPHENE® FLAM
ELASTOPHENE® Flam is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam is…
View ProductRelated Projects
Airport High School – West Columbia, South Carolina
Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.