SOPRALENE® 180 SP 3.0 SKU: 00622
SOPRALENE® 180 SP 3.0 SKU: 00622
SOPRALENE 180 SP 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 120 mils (3.0 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE 180 SP 3.0 onto the roof surface and allow to relax. Position SOPRALENE 180 SP 3.0 in desired position and back roll the product. SOPRALENE 180 SP 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 SP 3.0 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRAMASTIC™ SBS ELASTIC CEMENT
SOPRAMASTIC SBS Elastic Cement is a modified bitumen mastic for use in approved multi-ply membrane, flashing and waterproofing assemblies. SOPRAMASTIC…
View Product
SENTINEL® KEE P200
SENTINEL KEE P200 is a high-performance, polyester reinforced, thermoplastic roofing membrane that utilizes DOW® ELVALOY™ KEE (Ketone Ethylene Ester) Terpolymer.
View Product
ELASTOCOL™ STICK H2O
ELASTOCOL STICK H2O is a water-based polymer emulsion primer approved for use in roofing, walls and waterproofing assemblies. ELASTOCOL STICK…
View ProductRelated Projects
Dividing Bridge – Pocomoke City, MD
Beijing Zoo Road Bridge – Beijing, China
The Zoo Road viaduct bridge crosses Beijing Zoo, as a part of the infrastructure for Beijing 2008 Olympic Games. The waterproofing area is about 27,000 ft2, and completed October 2007. The waterproofing layer was installed by SOPREMA Macaden Automatic Installation System with 200 meter long SBS modified bitumen membrane—ANTIROCK.