SOPRALENE® STICK SKU: 00153
SOPRALENE® STICK SKU: 00153
SOPRALENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Self Adhered
- Reinforcement Polyester
- Thickness (minimum) 98 mils (2.5 mm)
- Thickness (nominal) 106 mils (2.7 mm)
- Topside Sanded
- Underside Release Film
Installation
Prior to installation, unroll SOPRALENE Stick onto the roof surface and allow to relax. Place SOPRALENE Stick in desired position. Remove the protective release film from the underside of the sheet and roll SOPRALENE Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Stick via self-adhered or cold adhesive applications. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
ALSAN TRAFIK PU 420
ALSAN Trafik PU 420 is a two-component, fast setting, aromatic polyurethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA…
View Product
SOPRALAP FLAM
SOPRALAP Flam is an SBS-modified bitumen cover strip for use with SOPRASMART Laminated Board products. SOPRALAP Flam is reinforced with…
View Product
COLPHENE® 180 FR GR
COLPHENE® 180 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules, and the underside is surfaced with fine mineral aggregate.
View ProductRelated Projects
Carrick High School – Pittsburgh, Pennsylvania
In 2017, Carrick High School’s roof was ready to be replaced. It was decided the best option was to tear off the previous roof and start fresh. Due to the relationship the architect, HHSDR Architects / Engineers, has with SOPREMA, the system that was selected to replace the previous roof included: SOPRA-ISO®, SOPRABOARD®, SOPRALENE® Flam Stick and SOPRALENE FLAM 180 FR GR.
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.