COLPHENE® 180 PS SKU: 01217
COLPHENE® 180 PS SKU: 01217
COLPHENE 180 PS (polyolefin, sanded) is a SBS-modified bitumen membrane approved for use in waterproofing assemblies. COLPHENE 180 PS is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM D6164, Type I, Grade S
- Reinforcement Non-Woven Polyester
- Thickness 87 mils (2.2 mm)
- Topside Polyolefin Burn-Off Film
- Underside Sanded
Installation
Prior to installation, unroll COLPHENE 180 PS onto the deck and allow to relax. Place COLPHENE 180 PS in desired position and back roll the product. Apply approved cold adhesive following the manufacturer specifications. COLPHENE 180 PS is then placed into the cold adhesive or and rolled with a weighted roller to ensure adhesion.
Testing & Approvals
Related Products
SOPRASEAL® Xpress G Screws
SOPRASEAL® Xpress Screws are self-drilling screw fasteners specifically designed for the installation of SOPRASEAL® Xpress G boards. SOPRASEAL® Xpress G…
View Product
COLPHENE® BSW H
COLPHENE BSW H is an SBS-modified bitumen waterproofing membrane for use in approved blind side/under slab waterproofing assemblies. COLPHENE BSW…
View Product
SOPRA-TITE SENTINEL® Drip Edge
SOPRA-TITE SENTINEL® Drip Edge combines custom engineering and superior performance with an attractive appearance. The patented design of the extruded…
View ProductRelated Projects
York Elementary School – Raleigh, North Carolina
Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.