COLPHENE® 180 SANDED SKU: 01207
COLPHENE® 180 SANDED SKU: 01207
COLPHENE 180 SANDED is a SBS-modified bitumen membrane approved for use in multi-ply membrane waterproofing assemblies. COLPHENE 180 SANDED is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrenebutadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM D6164, Type I, Grade S
- Installation Method Cold Adhered
- Reinforcement Non-Woven Polyester
- Thickness 84 mils (2.2 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll COLPHENE 180 SANDED onto the deck and allow to relax. Place COLPHENE 180 SANDED in desired position and back roll the product. Apply approved cold adhesive following the manufacturer’s guidelines. COLPHENE 180 SANDED is then placed into the cold adhesive and rolled with a weighted roller to ensure adhesion.
Testing & Approvals
Related Products
SOPRA-XPS 30
SOPRA-XPS 30 are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 30 is mainly used as a…
View ProductALSAN TRAFIK PU 211
ALSAN Trafik PU 211 is a single-component, polyurethane elastomeric basecoat. This basecoat provides excellent adhesion to SOPREMA polyurethane system topcoats…
View ProductELASTOPHENE® SANDED 2.2
ELASTOPHENE® Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded…
View ProductRelated Projects
Airport High School – West Columbia, South Carolina
Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.
Lancaster Material Distribution Center – Lancaster, Texas
In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.