COLPHENE® FLAM 250 FR GR SKU: 01223
COLPHENE® FLAM 250 FR GR SKU: 01223
COLPHENE® Flam 250 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane waterproofing assemblies. COLPHENE Flam 250 FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Installation Method Heat Welded
- Thickness 157 mils (4.0 mm)
- Topside Granules
- Underside Burn Off Film
Installation
Prior to installation, unroll COLPHENE Flam 250 FR GR onto the surface and allow to relax. Position COLPHENE Flam 250 FR GR in desired position and back roll the product. COLPHENE Flam 250 FR GR is then heat welded to approved substrates. Refer to SOPREMA® specifications and installation instructions for additional application guidelines.
Testing & Approvals
Related Products
SOPRABARRIER 20/30/40 PE
SOPRABARRIER is composed of a virgin blended linear-low-density polyethylene (LLDPE). SOPRABARRIER is designed to protect underlying roofing and waterproofing assemblies…
View ProductSOPRAROCK® DD
SOPRAROCK DD (dual density) is a rigid mineral fiber insulation for use in approved multi-ply membrane. SOPRAROCK DD is composed…
View ProductELASTOPHENE® HR FR GR
ELASTOPHENE HR FR GR (high resistance, fire retardant, granulated) is an SBSmodified bitumen cap ply for use in approved multi-ply…
View ProductRelated Projects
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.
Placer County Water Agency – Auburn, California
In 2015, the Placer County Water Agency took on a tear-off roofing project, in which SOPREMA products were used. SOPREMA was the right choice for this project because the breadth of products met the designer’s needs, including meeting California Title 24 energy efficiency standards with the use of ENERGY STAR® rated SOPRASTAR® Flam. Another appealing aspect was the versatility of SENTINEL® P150, which allowed coverage for the vertical walls throughout the roofing system.