SOPREMA

Search

SOPRASEAL® STICK VP SKU: 21501

SOPRASEAL® STICK VP SKU: 21501

SOPRASEAL STICK VP is a lightweight 24-mil self-adhered, vapor-permeable, water-resistive air barrier used in wall construction. SOPRASEAL STICK VP is composed of a tough tri-laminate composite facer coated with a high-tack adhesive and protected with a silicone release film.

SOPRASEAL STICK VP is installed without the use of a primer as an air and vapor mitigating barrier on vertical masonry and concrete walls, as well as exterior gypsum wall board, metal, OSB and exterior grade plywood sheathing.

Product Properties

  • Air Permeability ASTM ASTM E2178
  • Air Permeability ASTM ASTM E2357
  • Thickness 24 mils (0.6 mm)
  • Topside Trilaminated Polypropylene
  • Vapor Permability ASTM ASTM E96 (Procedure B)

Installation

1. Apply SOPRASEAL STICK VP vertically to the wall by peeling back about 12 in of the release film from the back side of the roll and adhere the sheet to the substrate making sure it is well aligned.

2. Continue to gradually peel off the remaining release film while hand pressing the sheet to the wall making sure to adhere it completely and avoiding air pockets and wrinkles.

3. After each sheet is hand installed, use a hard rubber hand roller to apply pressure over the entire surface to ensure uniform and intimate contact with the substrate.

4. Overlapping of sheets in the field of the wall that run horizontally should be a minimum 3 in and overlaps that run vertically should be a minimum 3 in. Laps at window openings and other detailed areas with flashing products should be a minimum 3 in.

 

Testing & Approvals

Related Products

SOPRAROCK Cant Strips

SOPRAROCK CANT STRIPS are a rigid mineral wool cant, coated with a bitumen and lightly sanded surface. SOPRAROCK CANT STRIPS…

View Product

ALSAN® TRAFIK RS 787 CF

ALSAN TRAFIK RS 787 CF (Color Finish) is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN TRAFIK RS 787…

View Product

SOPRALENE® 250 FR GR

SOPRALENE 250 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…

View Product

Related Projects

Chinese Hospital Outpatient Center – San Francisco, California

SOPREMA’s SENTINEL line was the product of choice for this project because of its proven quality, competitive pricing and superior technical support. Platinum Roofing, the contractor for the project, utilized SENTINEL G150, SENTINEL H2O Bonding Adhesive, SENTINEL VCM, and SENTINEL Prefabricated Corners and Pipe Flashings to complete the roof.

Carrick High School – Pittsburgh, Pennsylvania

In 2017, Carrick High School’s roof was ready to be replaced. It was decided the best option was to tear off the previous roof and start fresh. Due to the relationship the architect, HHSDR Architects / Engineers, has with SOPREMA, the system that was selected to replace the previous roof included: SOPRA-ISO®, SOPRABOARD®,  SOPRALENE® Flam Stick and SOPRALENE FLAM 180 FR GR.