SENTINEL® SPRAY ADHESIVE SKU: A-104, A-106, A-107
SENTINEL® SPRAY ADHESIVE SKU: A-104, A-106, A-107
SENTINEL SPRAY ADHESIVE is a solvent-based contact adhesive specially designed for adhering bare-backed SENTINEL PVC and KEE-modified membranes and flashings to a variety of substrates for horizontal or vertical applications.
A specially-formulated SENTINEL CLEANER is also available, and designed to clean spray guns and hoses used to apply SENTINEL SPRAY ADHESIVE.
Product Properties
- Overlying Material PVC or KEE Membrane
- Substrates Insulation, cover boards, OSB, structural concrete
Installation
SENTINEL SPRAY ADHESIVE should be applied to approved substrates free of oil, grease and other contaminants. Spray membrane and substrate with a continuous and uniform pattern holding the gun approximately 12 in perpendicular to the surface. Do not apply adhesive to seam areas intended to be hot air welded.
Allow the adhesive to partially dry before bonding membrane to substrate (approx. 3 – 10 minutes). Adhesive should feel tacky to the touch, but not transfer to the finger or string when touched. Install SENTINEL membrane and broom into place.
Testing & Approvals
Related Products
SENTINEL® KEE P150
SENTINEL KEE P150 is a high-performance, polyester reinforced, thermoplastic roofing membrane that utilizes DOW® ELVALOY™ KEE (Ketone Ethylene Ester) Terpolymer.
View Product
SENTINEL® P150
SENTINEL P150 is a high-performance, bare-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope applications. SENTINEL…
View ProductSENTINEL® P200
SENTINEL P200 is a high-performance, bare-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope applications. SENTINEL…
View ProductRelated Projects
Flores De La Playa Condominium – Satellite Beach, Florida
When selecting a product to re-roof the building after the storm, it was important to select a product that would be able to withstand the impact of future tropical storms and hurricanes. The system that was selected included a base ply of ELASTOPHENE® SP 3.0 with 350 PSI lightweight concrete applied on top and SOPRALENE® 180 PS 3.0 with a cap sheet of SOPRALENE Flam 180 FR GR.
Mall of Georgia – Buford, GA
The expansive Mall of Georgia is the largest mall in Georgia and one of the largest in all of the United States, consisting of more than two hundred stores on three levels.