SOPREMA

Search

ALSAN® COATING RUST INHIBITIVE PRIMER SKU: L-ACMPE

ALSAN® COATING RUST INHIBITIVE PRIMER SKU: L-ACMPE

$391.50

ALSAN® Coating Rust Inhibitive Primer is a water-based acrylic rust inhibitive primer/basecoat that is VOC compliant, single component, plasticizer-free, and used to enhance adhesion of ALSAN Coatings on metal surfaces and prevent rusting of the substrate.

Product Properties

  • Material Primer

Installation

ALSAN Coating Rust Inhibitive Primer can be applied using single component airless spray equipment (preferred), roller or brush. Prior to starting application, perform an adhesion test on each surface type to ensure adequate bond can be achieved, or if another primer or other specific surface preparation is required. Do not apply over wet substrates or with the risk of precipitation. Protect from freezing during transit, handling, storage, and installation. Surface should be cleaned to remove any dust, dirt or loose flaking rust before application. In most cases, power washing with 2000 psi pressure is acceptable.

NOTE: This product cures by water evaporation only and must cure for at least 24 hours. Low temperatures and high humidity will slow the curing process. Product should not be applied when ambient temperature is below 50°F (10°C), could fall below 32°F (0°C) within 24 hours of application, or if rain or dew is likely to occur before product dries and/or within 6 hours of
application.

 

Our Other Brands

Related Products

COLPHENE® SP 2.2

COLPHENE® SP 2.2 (sanded, polyolefin) is a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen, reinforced with a high-quality…

View Product

SOPRA XPS 30

SOPRA-XPS 30 is a thermal insulation board made of rigid extruded polystyrene with shiplap or square edges on its four…

View Product

ANTIROCK® EMULSION PRIMER

ANTIROCK Emulsion Primer is a bituminous emulsion (a stabilized blend of bitumen and water without solvent). It is used to…

View Product

Related Projects

Holiday Inn Express – Medina, Ohio

SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.

Flatiron Building – New York, New York

The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.