ALSAN® RS 260 LO FLASH SKU: L-RS0525
ALSAN® RS 260 LO FLASH SKU: L-RS0525
ALSAN RS 260 LO FLASH is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications. ALSAN RS 260 LO FLASH resin is combined with fleece fabric to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 260 LO FLASH is available in a summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 260 LO FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRASEAL® Xpress G
SOPRASEAL Xpress G is an exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to…
View Product
ELASTOPHENE STICK HR FR GR
ELASTOPHENE® Stick HR FR GR (high resistance, fire retardant, granules) is an SBS-modified bitumen cap ply for use in approved…
View Product
SOPREMA Industrial XL Gutter
SOPREMA Industrial XL Gutter is the largest gutter system that is engineered and tested to meet the requirements of the…
View ProductRelated Projects
Lancaster Material Distribution Center – Lancaster, Texas
In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.
Riviere Saint-Etienne Bridge – Saint Denis, France
City: Saint Denis
Country: Reunion Island (Bourbon Island) - France
Product used: ANTIROCK® P quickly implemented on asphalt with the use of 2 new generation of Mini-Macaden® - Upstands : Flashing® TP