SOPREMA

Search

ALSAN® RS PRE-CUT FLEECE SKU: L-RS023B

ALSAN® RS PRE-CUT FLEECE SKU: L-RS023B

ALSAN RS Fleece is a proprietary non-woven polyester reinforcement used in ALSAN RS liquid membrane applications. ALSAN RS Fleece is available in a roll or in pre-cut detail kits.

*ALSAN RS Fleece should not be used with ALSAN Flashing or COLPHENE LM BARR Products. These products should be used with SOPREMA Polyfleece. For more information visit each products respective product data sheet.

Product Properties

  • Material Reinforcement

Installation

Mix and apply ALSAN RS products in strict accordance with published instructions. Apply mixed resin to the prepared surface and roll out ALSAN RS Fleece into the liquid resin, making sure that the roll is unrolling smooth and without any wrinkles. ALSAN RS Fleece will begin to saturate into the liquid resin. Using a roller, wet the fleece with resin, applying light pressure. Roll the fleece with a nap roller to eliminate any air bubbles, wrinkles, etc.

Apply additional liquid resin mix on top of ALSAN RS Fleece until fully saturated and the layer of resin is fully and uniformly applied. Allow a 2 inch (5 cm) overlap at the side laps and 4 inches (10 cm) overlap at all flashing tie-ins and end laps.

 

Testing & Approvals

Our Other Brands

Related Products

LASTOBOND® SHIELD HT

LASTOBOND Shield HT (high temperature) is a SBS-modified bitumen underlayment for use in approved steep slope assemblies, and is designed…

View Product

ALSAN® COATING SIL WALKWAY GRADE

ALSAN Coating SIL Walkway Grade is a VOC compliant, high solids, single component, moisture curing, silicone rubber coating used to…

View Product

SOPRAFIX® MBB BATTEN BAR

SOPRAFIX® MBB (Metal Batten Bar) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with 3″ o.c. pre-punched…

View Product

Related Projects

ANB Bank – Denver, Colorado

When the Denver ANB Bank was to go through a remodel, SOPREMA’s COLPHENE® LM BARR product was selected to waterproof the building. With a tight deadline and existing concrete preparation to take into consideration, COLPHENE LM BARR was the perfect solution due to its excellent performance qualities. With COLPHENE LM BARR’s STPE moisture cure technology, the new and improved ANB Bank will have a continuous waterproofing layer that can withstand extreme cold and high temperatures without cracking or softening for many years to come.

Paris Hotel & Casino – Las Vegas, Nevada

With nearly 3,000 rooms, the Paris Hotel & Casino is one of the largest properties in Las Vegas. SOPREMA provided a cost-competitive, UL Class A system with a 20-year labor and material warranty.