ELASTOCOL™ 500 SKU: D35735
ELASTOCOL™ 500 SKU: D35735
ELASTOCOL 500 is an asphalt based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL 500 is composed of a proprietary blend of asphalt, solvents and additives used to increase adhesion when using heat welding, cold adhesive or hot asphalt application methods.
Product Properties
- Base Solvent-Based
- Overlying Application Heat Welded, Cold Adhesive, Hot Asphalt
Installation
Mix prior to application. ELASTOCOL 500 is applied to the approved area via brush, roller or spray equipment. ELASTOCOL 500 is applied at a rate of 0.35 to 0.6 gallon per 100 square feet over non porous substrate. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® S BONDING ADHESIVE
SENTINEL S BONDING ADHESIVE is a solvent based contact adhesive specially designed for adhering bare-backed SENTINEL PVC membranes and flashings…
View Product
SOPRAJOINT®
SOPRAJOINT® is an SBS-modified bitumen expansion joint membrane for use in approved multi-ply membrane and flashing assemblies. SOPRAJOINT is composed…
View Product
ALSAN® RS LO Primer
ALSAN® RS LO Primer is a 100% solids, low-odor epoxy used to promote adhesion to metals, concrete, masonry, wood, and…
View ProductRelated Projects
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.
Placer County Water Agency – Auburn, California
In 2015, the Placer County Water Agency took on a tear-off roofing project, in which SOPREMA products were used. SOPREMA was the right choice for this project because the breadth of products met the designer’s needs, including meeting California Title 24 energy efficiency standards with the use of ENERGY STAR® rated SOPRASTAR® Flam. Another appealing aspect was the versatility of SENTINEL® P150, which allowed coverage for the vertical walls throughout the roofing system.