SOPREMA

Search

COLVENT™ 180 SA SKU: 00376

COLVENT™ 180 SA SKU: 00376

COLVENT 180 SA is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. COLVENT 180 SA is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with high tack self-adhesive ribbons and is reinforced with a tough, dimensionally stable non-woven polyester mat. The ribbon strips are arranged in a pattern to vent vapor pressure between the substrate and the COLVENT 180 SA. The topside is surfaced with fine mineral aggregate to optimize cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Self Adhered
  • Reinforcement Polyester
  • Thickness 120 mils (3.0 mm)
  • Topside Sanded
  • Underside Release Film

Installation

Prior to installation, unroll COLVENT 180 SA onto the roof surface and allow to relax. Place COLVENT 180 SA in desired position. Remove the protective release film from
the underside of the sheet and roll COLVENT 180 SA into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to COLVENT 180 SA
via cold adhesive. Refer to the SOPREMA SBS Roofing guide for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

ALSAN TRAFIK PU 420

ALSAN Trafik PU 420 is an aromatic polyurethane topcoat. A two-component, fast-setting product, ALSAN Trafik PU 420 elastomeric coating offers…

View Product

ALSAN® RS 223 MIXING POWDER

ALSAN® RS 223 Mixing Powder is utilized in conjunction with ALSAN® RS 210 to create ALSAN RS 233 Self-Leveling Mortar….

View Product

SOPRANATURE® Edge Restraint

SOPRANATURE Edge Restraints are a lightweight, rigid, aluminum, L-shaped restraints designed to retain planting media, stones, pavers and tiles in…

View Product

Related Projects

Portland Bridge – Portland, Maine

Leicester Fire Department – Leicester, Massachusetts

When building a new fire station, the department needed a wall assembly that would ensure a water-tight building. To complete this project, SOPREMA wall systems were selected. With the use of SOPRASEAL® LM 203, SOPRASEAL Stick VP and SOPRASEAL Stick 1100T, the department does not have to worry about moisture infiltration in their brand new facility.