SOPREMA

Search

ELASTOPHENE® FLAM HR 2.2 SKU: 00266

ELASTOPHENE® FLAM HR 2.2 SKU: 00266

ELASTOPHENE® Flam HR 2.2 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam HR 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6163
  • Installation Method Heat Welded
  • Reinforcement Glass Scrim
  • Thickness 87 mils (2.2 mm)
  • Topside Burn Off Film
  • Underside Burn Off Film

Installation

Prior to installation, unroll ELASTOPHENE Flam HR 2.2 onto the roof surface and allow to relax. Position ELASTOPHENE Flam HR 2.2 in desired position and back roll the product. ELASTOPHENE Flam HR 2.2 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam HR 2.2 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

ELASTOPHENE® ULTRA-STICK

ELASTOPHENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE ULTRA-STICK…

View Product

COLPHENE® FLAM 180

COLPHENE® Flam 180 is an SBS-modified bitumen cap ply is reinforced with a tough, dimensionally stable nonwoven polyester mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.

View Product

SENTINEL® COPPER ART PREFABRICATED OUTSIDE CORNERS

SENTINEL® Inside and Outside Corners are manufactured from fiberglass reinforced 60 mil PVC membrane and intended to flash 90 degree…

View Product

Related Projects

Ohio Stadium – Columbus, Ohio

Ohio Stadium is the fourth largest on-campus facility in the nation and the fifth largest stadium in the world. Unique in its double-deck horseshoe design, Ohio Stadium is both intimate and intimidating and only one of many buildings on the OSU campus where SOPREMA products are utilized.

ANB Bank – Denver, Colorado

When the Denver ANB Bank was to go through a remodel, SOPREMA’s COLPHENE® LM BARR product was selected to waterproof the building. With a tight deadline and existing concrete preparation to take into consideration, COLPHENE LM BARR was the perfect solution due to its excellent performance qualities. With COLPHENE LM BARR’s STPE moisture cure technology, the new and improved ANB Bank will have a continuous waterproofing layer that can withstand extreme cold and high temperatures without cracking or softening for many years to come.