LASTOBOND® SHIELD HT SKU: 10510
LASTOBOND® SHIELD HT SKU: 10510
LASTOBOND SHIELD HT (high temperature) is a SBS-modified bitumen underlayment for use in approved steep-slope assemblies. LASTOBOND SHIELD HT is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with high tack self-adhesive.
Product Properties
- Overlying Materials None
- Thickness 40 mils (1.0 mm)
- Topside Polyethylene Film
Installation
Prior to installation, unroll LASTOBOND SHIELD HT onto the roof surface and allow to relax. Place LASTOBOND SHIELD HT in desired position. Once positioned, firmly hold the membrane in place and remove the silicone release film. For best results, slowly peel film backing away at an angle. Roll LASTOBOND SHIELD HT into place with a weighted roller to ensure positive adhesion.
Testing & Approvals
Related Products
SOPRAWAY NG2
SOPRAWAY NG2 is an anti-fracture acoustic membrane intended for ceramic tiles floors. The SOPRAWAY NG2 membrane allows the direct application…
View ProductELASTOPHENE® HR SANDED 3.0
ELASTOPHENE HR Sanded 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…
View ProductALSAN® COATING BUTYL FLEECE TAPE
ALSAN COATING BUTYL FLEECE TAPE contains a butyl rubber compound with a polyester fleece face used where required or recommended…
View ProductRelated Projects
Flatiron Building – New York, New York
The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.