MAMMOUTH® NEO Base is a thermoplastic polyurethane (TPU) self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. MAMMOUTH NEO Base is composed of a proprietary formulation of bio-based TPU polymers in combination with a high tack self-adhesive layer and is reinforced with a high performance glass grid/glass fleece. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with self-adhesive ribbon strips protected by a polyolefin release film that is removed during application.

Product Properties

  • Component Base
  • Installation Method Self-Adhered
  • Reinforcement glass scrim
  • Thickness 79 (2.0 mm)
  • Topside Burn Off Film
  • Underside Self-Adhered


Prior to installation, unroll MAMMOUTH NEO Base onto the roof surface and allow to relax. Place MAMMOUTH NEO Base in desired position. Remove the protective release film from the underside of the sheet and roll MAMMOUTH NEO Base into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to MAMMOUTH NEO Base via heat welding.


Related Products

SBL Roof Cement

SBL Roof Cement is an asbestos-free, trowel grade mastic for use in approved multi-ply membrane assemblies. It is composed of…

View Product


DUOTACK® 365 is a low rise, two component polyurethane adhesive. DUOTACK 365 is used to adhere insulation and cover boards…

View Product


SOPRADRAIN ECOVENT is a geometric patterned core drainage mat designed to eliminate hydrostatic pressure on vegetated roofs, foundation walls, retaining…

View Product

Related Projects

Chinese Hospital Outpatient Center – San Francisco, California

SOPREMA’s SENTINEL line was the product of choice for this project because of its proven quality, competitive pricing and superior technical support. Platinum Roofing, the contractor for the project, utilized SENTINEL G150, SENTINEL H2O Bonding Adhesive, SENTINEL VCM, and SENTINEL Prefabricated Corners and Pipe Flashings to complete the roof.

Placer County Water Agency – Auburn, California

In 2015, the Placer County Water Agency took on a tear-off roofing project, in which SOPREMA products were used. SOPREMA was the right choice for this project because the breadth of products met the designer’s needs, including meeting California Title 24 energy efficiency standards with the use of ENERGY STAR® rated SOPRASTAR® Flam. Another appealing aspect was the versatility of SENTINEL® P150, which allowed coverage for the vertical walls throughout the roofing system.