ALSAN® FLASHING SKU: 32825, 32800
ALSAN® FLASHING SKU: 32825, 32800
ALSAN FLASHING is a unique polyurethane bituminous resin specifically formulated for liquid-applied flashings, details and maintenance applications. ALSAN FLASHING utilizes either Polyfleece or ALSAN Pre-Cut Fleece that, in combination with its unique chemistry, provides an extremely durable and easy to apply flashing solution.
Product Properties
- Installation Method 1 Part
- Material Liquid
- Technology Polyurethane Bitumen
Installation
Thoroughly mix ALSAN FLASHING before use. Using a brush or roller, apply ALSAN FLASHING to the prepared substrate at a rate of 2 gal/sq. Evenly coat the surface; taking precaution not to spread too thin or pool in low areas. Install the reinforcing fabric into the first layer of flashing. Add additional flashing between reinforcing fabric overlaps, to avoid dry lap conditions. With a roller or brush, embed the reinforcing fabric into the ALSAN FLASHING; eliminating any voids, ridges, air pockets, etc. Next generously apply a second layer of ALSAN FLASHING extending a minimum of 1 in beyond the reinforcing fabric, fully encapsulating the reinforcing fabric at a rate of 2 gal/sq. Once cured, apply the final coat of ALSAN FLASHING, at a rate of 2 gal/sq.
Testing & Approvals
Related Products
ALSAN® RS PASTE
ALSAN RS PASTE is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) heavy paste. ALSAN RS PASTE is used to fill…
View Product
SENTINEL® P200
SENTINEL P200 is a high-performance, bare-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope applications. SENTINEL…
View Product
SOPRAWAY ADHESIVE
SOPRAWAY Adhesive is a solvent-free, low-odor, acrylic latex emulsion-based adhesive designed for the interior installation of SOPRAWAY NG2 rubber acoustic…
View ProductRelated Projects
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.
Coronado Community Center – Coronado, California
Cleveland Clinic’s main campus consists of 41 buildings on about 140 acres near University Circle, Cleveland. They operate 14 family health and ambulatory surgery centers in surrounding communities and a multispecialty hospital and family health center in Weston, Florida. Various SOPREMA® systems have been chosen for their waterproofing needs.