ALSAN® RS 230 FIELD SKU: L-RS020S
ALSAN® RS 230 FIELD SKU: L-RS020S
ALSAN RS 230 FIELD is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 FIELD resin is combined with ALSAN RS Fleece to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FIELD is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FIELD to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRASEAL® STICK VP
SOPRASEAL STICK VP is a lightweight 24-mil self-adhered, vapor-permeable, water-resistive air barrier used in wall construction. SOPRASEAL STICK VP is…
View Product
ALSAN® PRE-CUT FLEECE
ALSAN PRE-CUT FLEECE is a polyester fleece reinforcement that is pre-cut to fit typical roofing and waterproofing details. Convenient and…
View Product
ELASTOPHENE® PS 3.0
ELASTOPHENE® PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS…
View ProductRelated Projects
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.
University of Oregon Residence Hall – Eugene, Oregon
With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.