ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN RS 230 FLASH is a high-performance, rapidsetting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN RS 230 FLASH resin is combined with ALSAN RS FLEECE to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FLASH is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10 – 15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of this PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRALASTIC® 123
SOPRALASTIC® 123 is a black waterproofing coating composed of elastomeric bitumen, mineral fillers and solvents. SOPRALASTIC® 123 is used to…
View ProductSOPRANATURE® METAL EDGING
SOPRANATURE METAL EDGING is a lightweight, durable aluminum edging designed to retain planting media, stones, pavers, and tiles in a…
View ProductELASTOPHENE® HR SANDED 2.2
ELASTOPHENE HR Sanded 2.2 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…
View ProductRelated Projects
College Street Culvert – Wadsworth, Ohio
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.