SOPREMA

Search

ALSAN® RS 260 LO FLASH SKU: L-RS0525

ALSAN® RS 260 LO FLASH SKU: L-RS0525

ALSAN RS 260 LO FLASH is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications. ALSAN RS 260 LO FLASH resin is combined with fleece fabric to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 260 LO FLASH is available in a summer or winter formulations.

Product Properties

  • Installation Method 2 Part
  • Material Liquid
  • Technology PMMA

Installation

Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.

After mixing, apply ALSAN RS 260 LO FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.

Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.

 

Testing & Approvals

Related Products

SOPRAFIX® MBBR BATTEN BAR

SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with…

View Product

COLPHENE® FLAM 180 FR GR

COLPHENE® Flam 180 FR GR (fire retardant, granulated) a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen, reinforced a nonwoven polyester mat. The topside is surfaced with ceramic coated granules, and the underside is surfaced with polyolefin burn-off film.

View Product

COLPHENE® STICK

COLPHENE® Stick SBS-modified bitumen, self-adhered base ply reinforced with a tough, dimensionally stable nonwoven polyester mat. A fine mineral aggregate on the topside facilitates self-adhered and cold-adhesive applications.

View Product

Related Projects

Museum of the American Revolution – Philadelphia, Pennsylvania

Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.

San Francisco Airport – San Francisco, California

San Francisco International Airport is the 13th largest airport in the United States featuring four modern runways. The new International Terminal opened in 2000 and had the distinction of being the largest terminal building ever built in North America. SOPREMA was able to provided a cost-competitive, UL Class A system with a 20-year labor and material warranty.