COLVENT™ FLAM TG SKU: 00372
COLVENT™ FLAM TG SKU: 00372
COLVENT Flam TG (torch grade) is an SBS-modified bitumen vented base ply for use in approved multi-ply membrane and flashing assemblies. COLVENT Flam TG is reinforced with a tough glass fiber mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll COLVENT Flam TG onto the roof surface and allow to relax. Place the membrane into the desired position and back roll the product. COLVENT Flam TG is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to COLVENT Flam TG via heat welding.
Testing & Approvals
Related Products
ALSAN® RS Cleaner
ALSAN RS CLEANER is a solvent-based solution specially formulated to clean and reactivate fully cured, in-place ALSAN RS membranes. ALSAN…
View Product
ALSAN® RS PASTE
ALSAN RS PASTE is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) heavy paste. ALSAN RS PASTE is used to fill…
View Product
ALSAN® RS 276 PRIMER
ALSAN RS 276 PRIMER is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 276 PRIMER is utilized to…
View ProductRelated Projects
170 East 77th Street – New York, New York
The fully reinforced system membrane included ALSAN RS 276 primer, ALSAN RS 230 field and ALSAN RS 230 flash reinforced with ALSAN RS fleece. ALSAN RS 233 self leveling mortar, a broadcast of #0 quartz silica aggregate and five distinct top coat colors finished off this incredible rooftop terrace.
Airport High School – West Columbia, South Carolina
Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.