SOPRAFIX® BASE 614SKU: 00433

SOPRAFIX® Base 614 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies and is designed specifically for mechanical attachment to approved substrates. SOPRAFIX Base 614 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat engineered for mechanical attachment. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Mechanically Attached
  • Reinforcement Polyester
  • Thickness 157 mils (4.0 mm)
  • Topside Burn Off Film
  • Underside Burn Off Film

Installation

Prior to installation, unroll SOPRAFIX Base 614 onto the roof surface and allow to relax. Place SOPRAFIX Base 614 in desired position. SOPRAFIX Base 614 is mechanically fastened through the 4 inch, 5 inch, or 6 inch side laps using the 2 inch, 2.4 inch plates, or batten bar respectively following the details for the required uplift pressure. Subsequent approved inter-ply or cap ply membranes are applied to SOPRAFIX Base 614 via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.

Testing & Approvals

FBC FL13806-R8  Liquid-Applied Roof Systems FM Miami-Dade UL

Share this page