SOPRALENE® 180 PS 2.2SKU: 00569

SOPRALENE® 180 PS 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 PS 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin (P) burn-off film and the underside is surfaced with fine mineral aggregate (S) to facilitate cold adhesive and hot asphalt applications.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Polyester
  • Thickness 91 (2.3 mm)
  • Topside Burn Off Film
  • Underside Sanded

Installation

Prior to installation, unroll SOPRALENE 180 PS 2.2 onto the roof surface and allow to relax. Place SOPRALENE 180 PS 2.2 in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer specifications. SOPRALENE 180 PS 2.2 is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 PS 2.2 via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.

Testing & Approvals

FBC FL3915-R15  Modified Bitumen Roof Systems FM Miami-Dade UL

Share this page