SOPRALENE® FLAM 180 SKU: 00410
SOPRALENE® FLAM 180 SKU: 00410
SOPRALENE® Flam 180 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam 180 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE Flam 180 onto the roof surface and allow to relax. Position SOPRALENE Flam 180 in desired position and back roll the product. SOPRALENE Flam 180 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Flam 180 via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® KEE P200 HFB
SENTINEL KEE P200 HFB is a high-performance, fleecebacked, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope…
View ProductSOPRA-XPS 25 CW
SOPRA-XPS 25CW are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 25CW is mainly used as thermal…
View ProductCOLPHENE® FLAM 180 FR GR
COLPHENE® Flam 180 FR GR (fire retardant, granulated) a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer-modified bitumen, reinforced a nonwoven polyester mat. The topside is surfaced with ceramic coated granules, and the underside is surfaced with polyolefin burn-off film.
View Product