SOPRALENE® STICK SKU: 00153
SOPRALENE® STICK SKU: 00153
SOPRALENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Self Adhered
- Reinforcement Polyester
- Thickness (minimum) 98 mils (2.5 mm)
- Thickness (nominal) 106 mils (2.7 mm)
- Topside Sanded
- Underside Release Film
Installation
Prior to installation, unroll SOPRALENE Stick onto the roof surface and allow to relax. Place SOPRALENE Stick in desired position. Remove the protective release film from the underside of the sheet and roll SOPRALENE Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Stick via self-adhered or cold adhesive applications. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
COLPHENE® H
COLPHENE H is a hot-applied, rubberized asphalt composed of a select
blend of refined asphalts, recycled rubber and inert extenders.
ANTIROCK® EMULSION PRIMER
ANTIROCK Emulsion Primer is a bituminous emulsion (a stabilized blend of bitumen and water without solvent). It is used to…
View ProductALSAN® TRAFIK RS 733 SELF-LEVELING MORTAR
ALSAN TRAFIK RS 733 Self-Leveling Mortar is created by combining ALSAN TRAFIK RS 733 Part A and ALSAN TRAFIK RS…
View ProductRelated Projects
Dividing Bridge – Pocomoke City, MD
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.