COLVENT™ TG is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. COLVENT TG is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with partially adhered ribbons and is reinforced with a high quality random glass fiber mat. The ribbon strips are arranged in a pattern to vent vapor pressure between the substrate and the COLVENT TG. The topside is surfaced with fine mineral aggregate to optimize cold adhesive and hot asphalt applications and the underside is surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Heat Welded
  • Reinforcement Glass Fiber
  • Thickness 87 mils (2.2 mm)
  • Topside Sanded
  • Underside Burn Off Film


Prior to installation, unroll COLVENT TG onto the roof surface and allow to relax. Place COLVENT TG in desired position and back roll the product. COLVENT TG is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to COLVENT TG via cold adhesive or hot asphalt. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

Testing & Approvals

FBC FL3915-R15  Modified Bitumen Roof Systems FM Miami-Dade UL

Share this page