ELASTOPHENE® SP 2.2 SKU: 00490
ELASTOPHENE® SP 2.2 SKU: 00490
ELASTOPHENE SP 2.2 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE SP 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside is surfaced with fine mineral aggregate and underside are surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll ELASTOPHENE SP 2.2 onto the roof surface and allow to relax. Position ELASTOPHENE SP 2.2 in desired position and back roll the product. ELASTOPHENE SP 2.2 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE SP 2.2 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRASEAL® LM 202 VP
SOPRASEAL LM 202 VP is a one-component spray applied vapor-permeable air barrier membrane used in wall construction. SOPRASEAL LM 202…
View ProductALSAN® RS 260 LO FLASH
ALSAN RS 260 LO FLASH is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications….
View ProductSOPRAFLASH™ UN
SOPRAFLASH™ UN is an uncured neoprene flashing material. SOPRAFLASH UN is used in conjunction with COLPHENE® H and COLPHENE H-EV…
View ProductRelated Projects
Columbia University Medical Center – New York, New York
When adding a new building to the Columbia University Medical Center campus, a top priority was that all products were available for a single source manufacturer that offered one warranty for the entire project. That is where SOPREMA came in.