SOPRALENE® 180 SANDED SKU: 00220
SOPRALENE® 180 SANDED SKU: 00220
SOPRALENE 180 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 Sanded onto the roof surface and allow to relax. Place SOPRALENE 180 Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer’s guidelines. SOPRALENE 180 Sanded is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 Sanded via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
ELASTOCOL™ 350
ELASTOCOL™ 350 is a zero VOC, water based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL 350…
View Product
SOPRAFIX® #15 HD FASTENER
SOPRAFIX® #15 HD (Heavy Duty) Insulation Fasteners are designed for the attachment of insulation and membrane to steel (18-22 ga.),…
View Product
SOPRAFLOR X
SOPRANATURE SOPRAFLOR X is a growing medium formulated for extensive non-irrigated and low-maintenance SOPRANATURE systems. SOPRANATURE SOPRAFLOR X has a…
View ProductRelated Projects
Leicester Fire Department – Leicester, Massachusetts
When building a new fire station, the department needed a wall assembly that would ensure a water-tight building. To complete this project, SOPREMA wall systems were selected. With the use of SOPRASEAL® LM 203, SOPRASEAL Stick VP and SOPRASEAL Stick 1100T, the department does not have to worry about moisture infiltration in their brand new facility.
Cleveland Museum of Art – Cleveland, Ohio
This $350 million project was the largest cultural project in Ohio’s history. SOPREMA’s SOPRALENE® Flam 180 polymer modified bitumen two-ply system was installed. SOPREMA was the ideal manufacturer for the project as they were able to provide a variety of quality products to accommodate the projects’
needs with a single source warranty.