SOPRALENE® 180 SP 3.0SKU: 00622

SOPRALENE 180 SP 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 SP 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Heat Welded
  • Reinforcement Polyester
  • Thickness 118 mils (3.0 mm)
  • Topside Sanded
  • Underside Burn Off Film

Installation

Prior to installation, unroll SOPRALENE 180 SP 3.0 onto the roof surface and allow to relax. Position SOPRALENE 180 SP 3.0 in desired position and back roll the product. SOPRALENE 180 SP 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 SP 3.0 via cold adhesive or hot asphalt. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

Testing & Approvals

FBC FL3915-R15  Modified Bitumen Roof Systems FM ICC-ES ESR-5561 Miami-Dade UL

Share this page