SENTINEL® H2O BONDING ADHESIVE SKU: A102
SENTINEL® H2O BONDING ADHESIVE SKU: A102
SENTINEL H2O BONDING ADHESIVE is a water-based polymeric adhesive specially designed for adhering SENTINEL PVC membranes to a variety of substrates for horizontal applications.
Product Properties
- Overlying Material PVC Membrane
Installation
Thoroughly mix SENTINEL H2O BONDING ADHESIVE prior to application. Apply SENTINEL H2O BONDING ADHESIVE to the substrate using a 3/8 in nap roller. Apply SENTINEL membrane while substrate is still wet and broom into place.
Testing & Approvals
Related Products
SENTINEL® PREFABRICATED CORNERS
SENTINEL PREFABRICATED CORNERS are manufactured from fiberglass reinforced 60 mil PVC membrane and intended to flash 90 degree outside and…
View ProductSOPRA-EDGE SENTINEL® Fascia
SOPRA-EDGE SENTINEL® Fascia is manufactured in 12 foot lengths with pre-punched fastening holes in the galvanized water dam to ensure…
View ProductALSAN TRAFIK PU 411
ALSAN Trafik PU 411 is a single-component, aliphatic urethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA polyurethane system…
View ProductRelated Projects
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.