SENTINEL® P200 HFB SKU: P305

SENTINEL® P200 HFB SKU: P305
SENTINEL P200 HFB is a high-performance, fleece-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope applications. SENTINEL P200 HFB is reinforced with a tenacious, anti-wicking, weft-inserted polyester fabric that is encapsulated on both sides with a proprietary thermoplastic PVC formulation. SENTINEL P200 HFB incorporates a heavy fleece-backed underside and is available in a variety of colors, including white, gray and tan.
Product Properties
- Backing Fleece backed
- Installation Method Fully Adhered
- Installation Method Mechanically Fastened
- Reinforcement Polyester
- Thickness 80 mils (2.0 mm)
Installation
SENTINEL P200 HFB is applied to approved substrates via mechanically attached or fully adhered systems. For fully adhered systems, SENTINEL H2O Bonding Adhesive or DUOTACK SPF are approved. Please refer to the specific product data sheet for application guidelines. For mechanically attached systems, please consult your SOPREMA representative for specific fastening patterns. All laps must be heat-welded to ensure a water tight seal.
Testing & Approvals



Related Products
ALSAN TRAFIK RS 730 Flash
ALSAN Trafik RS 730 Flash is a high performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications….
View Product
SOPRAFIX® 2″ MEMBRANE STRESS PLATES
SOPRAFIX® 2″ Membrane Stress Plates are specifically manufactured for use in SOPRAFIX® Systems. The unique design, including barbs and ribs,…
View Product
SOPRA-ISO®
SOPRA-ISO is a rigid polyisocyanurate thermal insulation panel for use in approved multi-ply membrane and flashing assemblies. SOPRA-ISO is composed…
View ProductRelated Projects
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.
University of Oregon Residence Hall – Eugene, Oregon
With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.