SOPREMA

Search

SOPRALENE® 180 SANDED SKU: 00220

SOPRALENE® 180 SANDED SKU: 00220

SOPRALENE 180 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Polyester
  • Thickness 120 mils (3.0 mm)
  • Topside Sanded
  • Underside Sanded

Installation

Prior to installation, unroll SOPRALENE 180 Sanded onto the roof surface and allow to relax. Place SOPRALENE 180 Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer’s guidelines. SOPRALENE 180 Sanded is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 Sanded via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.

 

Testing & Approvals

Related Products

SOPRA-ISO®

SOPRA-ISO is a rigid polyisocyanurate thermal insulation panel for use in approved multi-ply membrane and flashing assemblies. SOPRA-ISO is composed…

View Product

ELASTOPHENE® FR GR

ELASTOPHENE FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing…

View Product

ELASTOPHENE STICK HR FR GR

ELASTOPHENE® Stick HR FR GR (high resistance, fire retardant, granules) is an SBS-modified bitumen cap ply for use in approved…

View Product

Related Projects

Airport High School – West Columbia, South Carolina

Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.

Lancaster Material Distribution Center – Lancaster, Texas

In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.