SOPRALENE® 250 SANDED SKU: 00231

SOPRALENE® 250 SANDED SKU: 00231
SOPRALENE 250 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 250 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 250 Sanded onto the roof surface and allow to relax. Place SOPRALENE 250 Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 250 Sanded is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 250 Sanded via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals




Related Products
COLVENT™ 180 TG
COLVENT 180 TG is a SBS-modified bitumen membrane used in roofing assemblies. COLVENT 180 TG is reinforced with a tough,…
View Product
SOPRASOLIN HD
SOPRASOLIN HD is a multi-purpose self-adhered membrane composed of proprietary SBS-modified bitumen. The underside consists of a release film and…
View Product
SOPRALENE® 250 FR GR
SOPRALENE 250 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View ProductRelated Projects
American Airlines Trinity Campus – Fort Worth, Texas
When American Airlines, the world’s largest airline by fleet size, wanted to bring 12,000 employees together at a centralized location, it was a big job, to say the least.
University of Oregon Residence Hall – Eugene, Oregon
With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.