SOPREMA

Search

SOPRALENE® FLAM 180 FR+ GR SKU: 01526

SOPRALENE® FLAM 180 FR+ GR SKU: 01526

SOPRALENE® Flam 180 FR+ GR (fire retardant+, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam 180 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.

SOPRALENE Flam 180 FR+ GR includes the standard white granules. Contact SOPREMA® Customer Service or your sales representative for other granule color options and special order requirements.

Product Properties

  • ASTM ASTM D6164
  • Component Cap
  • Installation Method Heat Welded
  • Thickness 160 mils (4.0 mm)
  • Topside Granules
  • Underside Burn Off Film

Installation

Prior to installation, unroll SOPRALENE Flam 180 FR+ GR onto the roof surface and allow to relax. Position SOPRALENE Flam 180 FR+ GR in desired position and back roll the product. SOPRALENE Flam 180 FR+ GR is then heat welded to approved substrates. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

SBL HP Flashing Cement

SBL HP (High Performance) Flashing Cement is a trowel grade elastic, rubberized roof flashing cement. It is composed of a…

View Product

ELASTOPHENE® FLAM STICK

ELASTOPHENE® Flam Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE…

View Product

ELASTOPHENE® LS FR GR

ELASTOPHENE LS FR GR (low slope, fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply…

View Product

Related Projects

John R. Oishei Children’s Hospital – Buffalo, New York

SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.

Northeast Louisiana State Office Building – Monroe, Louisiana

As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.