SOPREMA

Search

SOPRALENE® FLAM STICK SKU: 06010

SOPRALENE® FLAM STICK SKU: 06010

SOPRALENE Flam Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Self Adhered
  • Reinforcement Polyester
  • Thickness 98 mils (2.5 mm)
  • Topside Burn Off Film
  • Underside Release Film

Installation

Prior to installation, unroll SOPRALENE Flam Stick onto the roof surface and allow to relax. Place SOPRALENE Flam Stick in desired position. Remove the protective release film from the underside of the sheet and roll SOPRALENE Flam Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE Flam Stick via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

SENTINEL® SILVER ART P150

SENTINEL Silver Art P150 is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide…

View Product

ALSAN® RS 276 PRIMER

ALSAN RS 276 Primer is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 276 Primer is utilized to…

View Product

COLPHENE® LM BARR Spray

COLPHENE LM BARR Spray is a single component, 95% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE LM…

View Product

Related Projects

Lancaster Material Distribution Center – Lancaster, Texas

In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.

Garibaldi Square Condos – Chicago, Illinois

This award winning project is the direct result of the building owner’s resistance to using hot asphalt and torches on the roof. SOPREMA’s mechanically attached, self-adhered system was used to accommodate the building owner’s desires.