SOPREMA

Search

SOPRASEAL® Xpress G Screws

SOPRASEAL® Xpress G Screws

SOPRASEAL® Xpress Screws are self-drilling screw fasteners specifically designed for the installation of SOPRASEAL® Xpress G boards. SOPRASEAL® Xpress G screws are #10-24 x 1-1/2 inch steel with an anti-corrosion coating. The screw heads are flat with a Phillips drive.

Product Properties

  • Type Fastener

Installation

Fasteners should be installed using an 1800-2500 RPM screw gun.

 

Testing & Approvals

Related Products

ELASTOPHENE® STICK

ELASTOPHENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Stick…

View Product

COLPLY® FLASHING CEMENT

COLPLY Flashing Cement is high quality, single component viscous cement formulated specifically for adhering SBS-modified bitumen membrane flashing assemblies. COLPLY…

View Product

SOPREMA® Counter Flashing

SOPREMA® Counter Flashing is designed to provide a watertight termination at the leading edge of the roofing material. SOPREMA Counter…

View Product

Related Projects

Fayetteville Area System of Transit Multimodal Project – Fayetteville, North Carolina

The original design selected for the center left the project over budget, so the contractor and architect had to go back to the drawing board. After researching additional options, both Baker Roofing and Gantt Huberman Architects felt very comfortable with SOPREMA’s proven history and the ability to meet the Buy American requirement, so they selected the SENTINEL® line for the project.

John R. Oishei Children’s Hospital – Buffalo, New York

SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.