SOPRASEAL® Stick 1100T SKU: 14046
SOPRASEAL® Stick 1100T SKU: 14046
SOPRASEAL Stick 1100T is a self-adhered waterproofing membrane. SOPRASEAL Stick 1100T is composed of a proprietary high quality elastomeric styrene- butadiene-styrene (SBS) polymer-modified bitumen blend and a woven polyethylene composite facer. SOPRASEAL Stick 1100T is used as a self-adhered air, vapor and rain barrier on vertical walls of masonry, concrete or gypsum sheathing designed to be used as a base for exterior insulation and finish systems (EIFS). SOPRASEAL Stick 1100T may also be used as a transition membrane at doors, windows, penetrations, etc. The underside consists of a self-adhesive bitumen layer protected by a release paper.
Product Properties
- Air Permeability ASTM ASTM E2178
- Air Permeability ASTM ASTM E2357
- Thickness 40 mils (1.0 mm)
- Topside Polyethylene Film
- Vapor Permability ASTM ASTM E96 (Procedure B)
Installation
Substrates must be clean and dry, primed with SOPRASEAL Stick Primer, ELASTOCOL Stick Zero or ELASTOCOL Stick H2O to ensure better adhesion. Apply by peeling back the release film on the underside of the sheet and applywith hand pressure. Once the sheet is in place, roll entire sheet with a weighted roller.
Application temperatures:
Winter grade: 14 to 50°F (-10 to 10°C)
Summer grade: 50 to 122°F (10 to 50°C)
Service temperatures:
Winter grade: -49 to 194°F (-45 to 90°C)
Summer grade: -49 to 194°F (-45 to 90°C)
UV exposure up to 90 days
Testing & Approvals
Related Products
ACOUSTIVIBE WDC
ACOUSTIVIBE WDC anchors are used on structures other than wooden girders or joists. They separate the suspended ceiling from the…
View ProductSOPRANATURE® DRAIN PLATE 40
SOPRANATURE DRAIN PLATE 40 is a 1.5 in tall, three-dimensional plastic drainage structure for green roofing systems. Unlike thin, flexible…
View ProductELASTOPHENE® FLAM
ELASTOPHENE® Flam is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam is…
View ProductRelated Projects
Northwest Wine Academy – Seattle, Washington
In 2017, the Northwest Wine Academy was in need of a new retrofit roofing project. The retrofit was to take place over the existing metal roof covering 10,735 square feet. To complete the project, SOPREMA’s SENTINEL® P150 HFB Copper Art was selected as the main roofing membrane.
MODE Apartments – Chicago, Illinois
The MODE Apartments located in Logan Square, just northwest of downtown Chicago, offers residents luxurious living both inside and out. SOPREMA’s SOPRANATURE® product line was used to develop the private patios and common areas that are available to residents.