COLPHENE® 180 SANDEDSKU: 01207

COLPHENE® 180 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane waterproofing assemblies. COLPHENE 180 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.

Product Properties

  • ASTM ASTM D6164
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Polyester
  • Thickness 87 mils (2.2 mm)
  • Topside Sanded
  • Underside Sanded

Installation

Prior to installation, unroll COLPHENE 180 Sanded onto the surface and allow to relax. Place COLPHENE 180 Sanded in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer specifications. COLPHENE 180 Sanded is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to COLPHENE 180 Sanded via cold adhesive or hot asphalt. Refer to SOPREMA® specifications and installation instructions for additional application guidelines.

Testing & Approvals

FBC FL13806-R8  Liquid-Applied Roof Systems UL

Share this page