SOPREMA

Search

COLPHENE® FLAM 250 FR GR SKU: 01223

COLPHENE® FLAM 250 FR GR SKU: 01223

COLPHENE® Flam 250 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane waterproofing assemblies. COLPHENE Flam 250 FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6164
  • Installation Method Heat Welded
  • Thickness 157 mils (4.0 mm)
  • Topside Granules
  • Underside Burn Off Film

Installation

Prior to installation, unroll COLPHENE Flam 250 FR GR onto the surface and allow to relax. Position COLPHENE Flam 250 FR GR in desired position and back roll the product. COLPHENE Flam 250 FR GR is then heat welded to approved substrates. Refer to SOPREMA® specifications and installation instructions for additional application guidelines.

 

Testing & Approvals

Related Products

ACOUSTIBOARD

The ACOUSTIBOARD panel elimiates the need for the 1 1/2 inch concrete covering that is usually poured over wood structures,…

View Product

SENTINEL® T-JOINT PATCHES

SENTINEL T-JOINT PATCHES are made using 60 mil, reinforced SENTINEL P150 PVC membrane cut into a perfect 4.5 in-diameter circle….

View Product

SOPRASLOPE™

SOPRASLOPE is a cementitious sloping material for use in approved multi-ply membrane and flashing assemblies. SOPRASLOPE is composed of an…

View Product

Related Projects

Parkland Hospital – Dallas, Texas

The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.

DFW International Airport – Dallas, Texas

The Dallas Fort Worth International Airport (DFW) became one of the first major U.S. airports to go carbon neutral in 2016, and since then, the facility has only accelerated its sustainability efforts. When ELASTOPHENE® and SOPRALENE® with ECO3 granules were specified for the roofs of DFW’s Terminal F Skylink buildings, it represented a new level of commitment to our planet.