COLPHENE® 3000 SKU: D10209
COLPHENE® 3000 SKU: D10209
COLPHENE 3000 is a self-adhered, SBS-modified bitumen membrane for use in approved waterproofing assemblies. COLPHENE 3000 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen. The topside is surfaced with a tri-laminated woven polyethylene facer and the underside is surfaced with a silicone release film that is removed during application.
Product Properties
- Installation Method Self Adhered
- Thickness 60 mils (1.5 mm)
- Topside Reflective Film
- Underside Release Film
Installation
Prior to installation, the substrate should be clean, sound, free of excess water and loose materials, grease and any contaminants which may compromise the performance of the product. Prep the surface with ELASTOCOL® Stick primer, ELASTOCOL® Stick Zero primer, or ELASTOCOL® Stick H20 primer. Peel back the top part of the release film. Adhere COLPHENE 3000 to the substrate, making sure the membrane is well aligned. Gradually peel back the remaining film, making sure the membrane is completely adhered using a membrane roller. The uppermost edge may be mechanically fastened using termination bars and sealed with SOPRAMASTIC SP1. Refer to SOPREMA’s specifications and installation instructions for additional application guidelines.
Related Products
SOPRANATURE® PAVER PEDESTALS
SOPRANATURE PAVER PEDESTALS support paving blocks on pedestrian traffic terraces. Manufactured from injection molded polypropylene, SOPRANATURE PAVER PEDESTALS consist of…
View Product
SOPRAROCK® DD
SOPRAROCK DD (dual density) is a rigid mineral fiber insulation for use in approved multi-ply membrane. SOPRAROCK DD is composed…
View Product
SOPRANATURE® SOPRAFILTER
SOPRANATURE SOPRAFILTER is a fabric made of a non-woven needle punched polypropylene and polyester fibers. SOPRANATURE SOPRAFILTER is used as…
View ProductRelated Projects
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.