SOPREMA

Search

COLPHENE® BSW V SKU: D00282

COLPHENE® BSW V SKU: D00282

COLPHENE® BSW V is an SBS-modified bitumen, self-adhered waterproofing membrane for use in approved blind side waterproofing assemblies. COLPHENE BSW V is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement. COLPHENE BSW V is designed specifically for vertical pre applied/blind side waterproofing applications. The topside is surfaced with fine mineral aggregate and the underside is covered with a silicone release film that is removed during application.

Product Properties

  • Installation Method Self Adhered

Installation

Prior to installation, unroll COLPHENE BSW V and allow to relax. Loose lay COLPHENE BSW V in desired position on approved prepared substrate. Once the membrane is in the desired location, remove the release film on the back side of the membrane and the DUO SELVEDGE side lap. Apply even pressure using a membrane roller over the entire surface, including the side lap to ensure adhesion. Once the self-adhered portion of the lap is adhered, a heat welding device is used to seal the lap. Refer to the SOPREMA® SBS Waterproofing Manual for additional application guidelines.

 

Related Products

COLPHENE® FLAM 250 FR GR

COLPHENE® Flam 250 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply reinforced with a tough, dimensionally stable nonwoven polyester mat. The topside is surfaced with ceramic coated granules, and the underside is surfaced with polyolefin burn-off film.

View Product

Bitutak MB Smooth

BITUTAK® MB is a 3.8 mm (150 mils) APP (Atactic Polypropylene) modified bitumen roofing membrane for approved multi-ply membrane and…

View Product

ELASTOPHENE® HR SANDED 3.0

ELASTOPHENE HR Sanded 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…

View Product

Related Projects

DFW International Airport – Dallas, Texas

The Dallas Fort Worth International Airport (DFW) became one of the first major U.S. airports to go carbon neutral in 2016, and since then, the facility has only accelerated its sustainability efforts. When ELASTOPHENE® and SOPRALENE® with ECO3 granules were specified for the roofs of DFW’s Terminal F Skylink buildings, it represented a new level of commitment to our planet.

Walter Reed Community Center – Arlington, Virginia

From the beginning, the architect designing the Walter Reed Community Center was asked to include a vegetative roof within the blueprints. The goal was a LEED certified Silver level building.