ALSAN® FLASHING SKU: 32825, 32800
ALSAN® FLASHING SKU: 32825, 32800
ALSAN FLASHING is a unique polyurethane bituminous resin specifically formulated for liquid-applied flashings, details and maintenance applications. ALSAN FLASHING utilizes either Polyfleece or ALSAN Pre-Cut Fleece that, in combination with its unique chemistry, provides an extremely durable and easy to apply flashing solution.
Product Properties
- Installation Method 1 Part
- Material Liquid
- Technology Polyurethane Bitumen
Installation
Thoroughly mix ALSAN FLASHING before use. Using a brush or roller, apply ALSAN FLASHING to the prepared substrate at a rate of 2 gal/sq. Evenly coat the surface; taking precaution not to spread too thin or pool in low areas. Install the reinforcing fabric into the first layer of flashing. Add additional flashing between reinforcing fabric overlaps, to avoid dry lap conditions. With a roller or brush, embed the reinforcing fabric into the ALSAN FLASHING; eliminating any voids, ridges, air pockets, etc. Next generously apply a second layer of ALSAN FLASHING extending a minimum of 1 in beyond the reinforcing fabric, fully encapsulating the reinforcing fabric at a rate of 2 gal/sq. Once cured, apply the final coat of ALSAN FLASHING, at a rate of 2 gal/sq.
Testing & Approvals
Related Products
ALSAN® PRE-CUT FLEECE
ALSAN PRE-CUT FLEECE is a polyester fleece reinforcement that is pre-cut to fit typical roofing and waterproofing details. Convenient and…
View ProductCOLPHENE® 180 SP
COLPHENE® 180 SP is an SBS-modified bitumen base ply reinforced with fine mineral aggregate. The underside is surfaced with polyolefin burn-off film to optimize heat welding.
View ProductSOPRALENE® 250 FR+ GR
SOPRALENE 250 FR+ GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View ProductRelated Projects
Leicester Fire Department – Leicester, Massachusetts
When building a new fire station, the department needed a wall assembly that would ensure a water-tight building. To complete this project, SOPREMA wall systems were selected. With the use of SOPRASEAL® LM 203, SOPRASEAL Stick VP and SOPRASEAL Stick 1100T, the department does not have to worry about moisture infiltration in their brand new facility.
American Airlines Center – Dallas, Texas
On March 21, 2022, a leaky roof on Dallas' American Airlines Center delayed the start of an NBA game between the hometown Mavericks and the Minnesota Timberwolves, and after the issue surfaced again a couple months later to interfere with a Mavs playoff game, quick action was needed to replace the building's 20-year-old roof.