ALSAN® RS 230 FIELD SKU: L-RS020S
ALSAN® RS 230 FIELD SKU: L-RS020S
ALSAN RS 230 FIELD is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 FIELD resin is combined with ALSAN RS Fleece to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FIELD is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FIELD to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® COATING ASPHALT BLEED BLOCKING PRIMER
ALSAN COATING ASPHALT BLEED BLOCKING PRIMER is a water-based, acrylic primer that is VOC compliant, single component and used to…
View Product
SOPRANATURE® MRB 30
SOPRANATURE MRB 30 is a moisture retention board with drainage properties made from 100% recycled polyester. SOPRANATURE MRB 30 is…
View Product
SOPRALENE® ULTRA-STICK® FR GR
SOPRALENE® ULTRA-STICK® FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View ProductRelated Projects
College Street Culvert – Wadsworth, Ohio
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.